• TLILIC0005 – Licence to Operate a Boom-type Elevating Work Platform (11m or more)
• RIIHAN301E – Operate Elevating Work Platform (scissor lift, vertical lift, and boom lift under 11m)

Types of EWP covered in this course

• Scissor Lifts (SL) – vertical elevating platforms
• Vertical Lifts (VL) – personnel lifts for indoor/outdoor use
• Boom Lifts (BL) – telescopic, hinged, or articulated devices
• Boom EWP over 11m (HRWL requirement – WP class licence)

This course ensures you are job‑ready to work safely at heights using different types of EWPs.

Topics include

• WHS Act 2012 and Australian Standards compliance
• Hazard identification and risk assessment (Hierarchy of Control)
• Pre‑operational checks and fault identification
• Safe operation of scissor, vertical and boom lifts
• Manoeuvring and positioning in a worksite
• Lifting tasks at height
• Safe shutdown and post‑operational inspection

Yellow Card Information

If you only require authorisation to operate scissor lifts, vertical lifts, or smaller boom lifts under 11m, the RIIHAN301E unit acts as the equivalent of a Yellow Card course.

This nationally recognised competency is widely accepted across Australian worksites as evidence of EWP training.

Duration and Schedule

• Course length: 2 days (may vary depending on existing experience, competency and class size)
• Class size: Small groups for personalised training

Day 1:

• 7:30-8:00 Introduction/enrolment
• 8:00-10:30 Theory revision
• 0:30-3:30 Practical training

Day 2:

• 7:00-8:00 Theory revision
• 8:00-10:00 WorkSafe theory exam
• 10:00-2:30 WorkSafe practical exam

Licencing Requirements in Tasmania

For boom lifts over 11m, you must complete TLILIC0005 and apply for a High Risk Work Licence (HRWL WP Class) through WorkSafe Tasmania.

Prerequisites

• 18 years of age or older
• Basic language, literacy and numeracy skills
• Valid Unique Student Identifier (USI) – create or find your USI
• Proof of identity and Tasmanian residential address (e.g. driver’s licence, utility bill, car registration)

Licence Cost

• Hobart: $650 per person (GST exempt)
• Launceston: $690 per person (GST exempt)

Group booking rates and discounts are available – please contact us for pricing. Eligible learners may access partial Keystone funding.

Recognised Qualification & Licensing Pathways

Assessment Process

Assessment is conducted by a WorkSafe Tasmania Accredited Assessor and includes:

• Written theory test
• Practical demonstration of safe EWP operation

Location and Facilities

• Delivery: Available in Hobart and Launceston, or onsite statewide at your workplace.
• Training on multiple EWPs – scissor, vertical and boom lifts
• Use of High Risk Work Solutions supplied equipment
• All course notes and assessment materials
• Facilities include tea, coffee, biscuits and access to local food outlets.
• Participants are welcome to bring lunch.

PPE required: Safety boots or enclosed shoes, long pants, and a hi‑vis short or long‑sleeve shirt.

Registered Training Organisation (RTO)

High Risk Work Solutions delivers this course as Talented Training RTO #45144, ensuring compliance with the Standards for RTOs. Participants who complete TLILIC0005 (Boom Lift over 11m) may apply for a High Risk Work Licence (WP class) via WorkSafe Tasmania. A Statement of Attainment is issued by Talented Training RTO #45144 when an individual successfully completes one or more accredited units within this course.

Why Choose High Risk Work Solutions?

• Specialist trainers with real industry experience
• Small class sizes – more practice time on the equipment
• Training available onsite statewide or at our facilities in Hobart or Launceston
• Practical, hands‑on learning with multiple types of EWPs

Application

This unit specifies the skills and knowledge required to safely operate a boom-type Elevating Work Platform (EWP) where the length of the boom is 11 metres or more in accordance with all relevant legislative requirements.

Boom-type elevating work platform means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated.

A person performing this work is required to hold a boom-type elevating work platform HRWL.

This unit requires a person operating an EWP to:

• plan for the work/task
• prepare for the work/task
• perform work/task
• pack up.

The post EWP Training – Boom Lift (over 11m), Scissor & Vertical Lift appeared first on High Risk Work Solutions.

RIIHAN301E Operate Elevating Work Platform (Scissor/Vertical Lift) SL VL

Topics include

• Introduction to the WHS Act 2012 and A/S
• Risk assessment/Hierarchy of control
• Detailed theory component
• Scissor/Vertical Lift pre-start inspection and fault identification
• Plan and prepare for work
• Intensive practical component
• Safely navigate site hazards
• Conduct various simulated Scissor/Vertical Lift tasks
• Scissor/Vertical Lift shut down and post-operational inspection
• Pack up

Duration and Schedule

• Course length: 4-6 Hours
• Class size: Small groups for personalised training

Licencing Requirements in Tasmania

Prerequisites

• 16 years of age or older
• Basic language, literacy and numeracy skills
• Valid Unique Student Identifier (USI) – create or find your USI
• Proof of identity and Tasmanian residential address (e.g. driver’s licence, utility bill, car registration)

Licence Cost

• $300.00 per person in Hobart (GST exempt)
• $340.00 per person in Launceston (GST exempt)

Group booking rates and discounts are available – please contact us for pricing. Eligible learners may access partial Keystone funding.

Recognised Qualification & Licensing Pathways

Location and Facilities

• Delivery: Available in Hobart or Launceston, or onsite statewide at your workplace.
• Training on multiple EWPs – scissor lifts and vertical lifts
• Use of High Risk Work Solutions supplied equipment
• All course notes and assessment materials
• Facilities include tea, coffee, biscuits and access to local food outlets.
• Participants are welcome to bring lunch.

PPE required: Safety boots or enclosed shoes, long pants, and a hi‑vis short or long‑sleeve shirt.

Registered Training Organisation (RTO)

High Risk Work Solutions delivers this course as Talented Training RTO #45144, ensuring compliance with the Standards for RTOs. A Statement of Attainment is issued by Talented Training RTO #45144 when an individual successfully completes one or more accredited units within this course. A Statement of Attainment is issued by Talented Training RTO #45144 when an individual successfully completes one or more accredited units within this course.

Why Choose High Risk Work Solutions?

• Specialist trainers with real industry experience
• Small class sizes – more practice time on the equipment
• Training available onsite statewide or at our facilities in Hobart or Launceston
• Practical, hands‑on learning with multiple types of EWPs

Application

This unit describes the skills and knowledge required to operate an elevating work platform (EWP boom lifts up to 11 meters). This unit applies to those working in operational roles.

The work required in this unit relates to the National Standard for High Risk Work but this unit does not provide the licence. Licensing, legislative, regulatory or certification requirements that may apply to this unit can vary between states, territories and industry sectors, and must be sourced prior to applying this unit.

This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisted by someone who has completed RIIHAN308F Load and Unload Plant or equivalent.

The post EWP Training – Scissor Lift and Vertical Lift (RIIHAN301E) appeared first on High Risk Work Solutions.