HLTAID014 Provide Advanced First Aid
HLTAID009 Provide cardiopulmonary resuscitation
HLTAID010 Provide basic emergency life support
HLTAID011 Provide First Aid

This certificate has an industry recommended renewal period of 36 months

Course duration

8 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

POA

Please enquire about group booking rates and discounts

CPD points

6

Prerequisites

Must be 16 years of age and possess good language, literacy and numeracy skills. Individuals undertaking this course will be expected to complete both written and practical assessment tasks.

Participants must have the physical capacity to perform all practical demonstrations including 2 minutes of uninterrupted CPR on the floor and performing rescue breathing techniques on manikins

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Respond to an emergency situation
• Apply appropriate emergency first aid procedures
• Coordinate first aid activities until arrival of medical assistance
• Communicate details of the incident
• Review the incident 

Application

This unit describes the skills and knowledge required to provide an advanced first aid response to a casualty in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies.

The unit applies to all persons who may be required to provide an advanced first aid response in a range of situations, including community and workplace settings.

Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.

Registered Training Organisation (RTO)

Training and assessment delivered on behalf of Allens Training Pty Ltd RTO 90909.

The post Advanced First Aid appeared first on High Risk Work Solutions.

This is a non-accredited course delivered by our training partner, Master Builders Tasmania

The post Asbestos Awareness appeared first on High Risk Work Solutions.

PUAFER008 Confine small emergencies in a facility

This certificate does not require renewal

Course duration

3-4 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

$250.00 per person in Hobart (GST exempt)

$290.00 per person in Launceston/Devonport (GST exempt)

Please enquire about group booking rates and discounts

Partially funded by Keystone if eligible

Prerequisites

Must be 16 years of age and possess good language, literacy and numeracy skills. Individuals undertaking this course will be expected to complete both written and practical assessment tasks.

Participants must have the physical capacity to complete all practical demonstrations, such as being able to safely confine emergencies using initial response equipment.

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Prepare for emergency situations
• Identify and assess emergency 
• Safely confine emergencies
• Use initial response equipment
• Report facility emergency response

Application

This unit of competency involves the skills and knowledge required to confine small emergencies in a facility and it applies to occupants who are required to have first attack firefighting skills. It includes preparing for emergency situations, identifying and assessing an emergency, safely confining emergencies, using initial response equipment and reporting on the facility’s emergency response.

Small emergencies in a facility include incidents such as small fires that can be controlled using a fire extinguisher; chemical spills that can be controlled using facility personal protective clothing and equipment and a spill kit; or a vehicle accident where there is no significant injury or damage.

The unit has been developed to cover the facilities as specified in Australian Standard (AS) 3745 and AS4083. For this unit, as covered by AS3745 and/or AS4083, occupants are people attending a facility on a permanent or temporary basis such as an employee, contractor, student or resident, but not a visitor or patient and a facility is a building, structure or workplace that is, or may be, occupied by people (occupants).

All aspects of the unit must be undertaken in line with legislative requirements, organisational policies and procedures, and accepted safe work practices. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Registered Training Organisation (RTO)

Training and assessment delivered on behalf of Allens Training Pty Ltd RTO 90909.

The post Basic Fire Fighting appeared first on High Risk Work Solutions.

MSMWHS216 Operate Breathing Apparatus

Course duration

6 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

POA

Please enquire about group booking rates and discounts

Partially funded by Keystone if eligible

Prerequisites

Must be 16 years of age and possess good language, literacy and numeracy skills

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Conduct pre-donning checks and tests on breathing apparatus
• Operate breathing apparatus
• Conclude operations in accordance with procedures

Application

This unit of competency covers the skills and knowledge required to operate and maintain breathing apparatus and equipment in an irrespirable atmosphere, as defined by the Australian Standard AS/NZS 1715:2009 Selection, use and maintenance of respiratory protective equipment.

This unit of competency applies to operators who are required to wear breathing apparatus because they are working:

• in a confined space
• with hazardous gases/vapours
• in an oxygen deficient atmosphere
• in other situations requiring the wearing of breathing apparatus.

Operators may also be required to wear breathing apparatus in emergency situations, however, this is not the prime focus of this unit.

This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Registered Training Organisation (RTO)

The Statement of Attainment is issued by AOTA RTO #91463

The post Breathing Apparatus appeared first on High Risk Work Solutions.

AHCMOM213 Operate and Maintain Chainsaws

Course duration

6-8 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

$280.00 per person in Hobart (GST exempt)

$320.00 per person in Launceston/Devonport (GST exempt)

Please enquire about group booking rates and discounts

Partially funded by Keystone if eligible

Prerequisites

Must be 16 years of age and possess good language, literacy and numeracy skills

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Assist in preparation of work-site​
• Recognise and apply workplace safety procedures
• Check and prepare chainsaw for use
• Operate chainsaw
• Complete and check chainsaw operation

Application

This unit of competency describes the skills and knowledge required to safely operate a hand-held chainsaw and maintain it in working condition.

This unit applies to cross-cutting fallen timber using safe cutting techniques.

The unit applies to individuals who apply low risk work procedures and comply with worksite health and safety requirements when operating hand-held chainsaws to carry out routine work.

No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.

Registered Training Organisation (RTO)

The Statement of Attainment is issued by Talented Training RTO #45144.

The post Chainsaw appeared first on High Risk Work Solutions.

Course Set RIIWHS202E & MSMWHS217 (Confined Space and Gas Testing Atmospheres)

Course duration

8 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

$400.00 per person (GST exempt)

Please enquire about group bookings rates and discounts

Partially funded by Keystone if eligible

CPD points

6

Prerequisites

Must be 16 years of age and possess good language, literacy and numeracy skills

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

Confined Spaces

• WHS Act 2012, Regulations, COP and A/S
• Risk assessment, SWMS/JSA’s
• Hierarchy of control
• Confined space hazards
• Roll of the CS entrant/standby person
• Gas generation and introduction to gas detection
• Permits
• Rescue techniques
• Plan and prepare for working in confined space
• Work in confined space
• Exit confined space
• Clean up

Gas Test Atmospheres

• WHS Act 2012, Regulations and A/S  
• Risk Assessment, SWMS, JSA’s
• Hierarchy of Control
• Typical gas detectors
• Symptoms of common gases
• Gas generation
• Gas detector challenge/bump testing and calibration
• Prepare for gas test and gas test
• Gas detector maintenance

Application

Confined Spaces

This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries.

It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

Gas Test Atmospheres

This unit of competency covers the skills and knowledge required to test the working atmosphere, using electronic test apparatus, to find out if it is safe for the proposed work.

It applies to situations where an individual may be required to carry out gas testing of an atmosphere prior to entering a specific area or workspace. The competency requires the person to interpret readings and take actions based on the interpretation.

Working environment may be hazardous, unpredictable, subject to time pressure, chaotic and expose responders to risk, on land or water, by day or night. Workplace atmospheres may include visible and invisible hazards and hazardous surfaces.

The unit is suitable for use in the following situations:

• confined spaces
• enclosed and partially enclosed spaces
• hot work
• storage tanks, silos, pits, pipes, shafts, ducts, transport vehicles and ships
• testing as part of issuing a work permit
• monitoring as part of working under a work permit
• open areas
• holding the gas tester by hand
• lowering the gas tester into a space, e.g. on a line

Registered Training Organisation (RTO)

The Statement of Attainment is issued by Training and assessment delivered on behalf of All Onsite Training and Assessment RTO #91463.

The post Combined Confined Space and Gas Test Atmospheres appeared first on High Risk Work Solutions.

PUASAR025 Undertake Confined Space Rescue

Course duration

1-2 days (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

POA

Please enquire about group booking rates and discounts

Partially funded by Keystone if eligible

Prerequisites

It is essential that the prerequisite units listed below are obtained prior to the issuance of this unit to individuals within the fire sector or the units contributing to the attainment of a fire qualification.

PUAFIR306 Identify, detect and monitor hazardous materials at an incident

PUASAR022 Participate in a rescue operation

Must be 16 years of age and possess good language, literacy and numeracy skills

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements – Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Prepare for confined space rescue operation
• Assess and manage confined space rescue
• Determine location and condition of casualties
• Gain entry to confined space 
• Remove casualties
• Conclude rescue operations

Application

This unit of competency involves the skills and knowledge required to undertake rescues in confined spaces as a member of a single organisation or team involving multiple organisations.

A confined space is determined by the hazards associated with a set of specific circumstances and not just because work is performed in a small space. A confined space means an enclosed or partially enclosed space that

• is not designed or intended primarily to be occupied by a person, and
• is, or is designed or intended to be, at normal atmospheric pressure while any person is in the space, and
• is or is likely to be a risk to health and safety from:
  • an atmosphere that does not have a safe oxygen level, or
  • contaminants, including airborne gases, vapours and dusts, that may cause injury from fire or explosion, or
  • harmful concentrations of any airborne contaminants, or engulfment.

The unit is applicable to a range of confined space rescue situations undertaken by personnel from the emergency services, volunteer organisations and/or organisations where confined space work is performed. Permits may be required to perform work in a confined space in various jurisdictions.

Registered Training Organisation (RTO)

The Statement of Attainment is issued by AOTA Pty Ltd RTO #91463.

The post Confined Space Rescue appeared first on High Risk Work Solutions.

RIIWHS202E Enter and Work in Confined Spaces

Topics include

• WHS Act 2012, Regulations, COP, A/S
• Risk assessment, SWMS, JSA’s
• Hierarchy of control
• Confined space hazards
• Roll of the CS entrant/standby person
• Gas generation and introduction to gas detection
• Permits
• Rescue techniques
• Plan and prepare for working in confined space
• Work in confined space
• Exit confined space
• Clean up

Duration and Schedule

• Course length: 6-7 Hours (may vary depending on existing experience, competency and class size)
• Class size: Small groups for personalised training

Licencing Requirements in Tasmania

Prerequisites

• 16 years of age or older
• Basic language, literacy and numeracy skills
• Valid Unique Student Identifier (USI) – create or find your USI
• Proof of identity and Tasmanian residential address (e.g. driver’s licence, utility bill, car registration)

Licence Cost

• $250 per person (GST exempt)

Group booking rates and discounts are available – please contact us for pricing. Eligible learners may access partial Keystone funding.

Recognised Qualification & Licensing Pathways

Location and Facilities

• Delivery: Available in Hobart, Launceston and Devonport, or onsite statewide at your workplace.
• Use of High Risk Work Solutions supplied equipment
• All course notes and assessment materials
• Facilities include tea, coffee, biscuits and access to local food outlets.
• Participants are welcome to bring lunch.

PPE required: Safety boots or enclosed shoes, long pants, and a hi‑vis short or long‑sleeve shirt.

Registered Training Organisation (RTO)

High Risk Work Solutions delivers this course as All High Risk Training Pty Ltd trading as All Onsite Training and Assessment RTO 91463, ensuring compliance with the Standards for RTOs. A Statement of Attainment is issued by All High Risk Training Pty Ltd when an individual successfully completes one or more accredited units within this course.

Why Choose High Risk Work Solutions?

• Specialist trainers with real industry experience
• Small class sizes – more practice time on the equipment
• Training available onsite statewide or at our facilities in Hobart, Launceston, or Devonport
• Practical, hands‑on learning

Application

This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries.

It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

The post Confined Spaces Course – Tasmania (RIIWHS202E) appeared first on High Risk Work Solutions.

UETDRMP010 – Provide First Aid in an ESI environment

Course duration

4 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

$170.00 per person (GST exempt)

Please enquire about group bookings rates and discounts

Partially funded by Keystone if eligible

CPD points

3

Prerequisites

Evidence of current and valid HLTAID009 Provide cardiopulmonary resuscitation Statement of Attainment or HLTAID011 Provide First Aid (which includes CPR) prior to commencing this training.

Physical fitness to be able to meet the demands of the practical demonstration skills including manual handling of a mock casualty.

Sufficient English language, literacy, numeracy and visual interpretation skills to successfully complete the course.

Personal safety equipment (PPE) must be provided by the student and worn during practical sessions.

Individuals undertaking this course will be expected to complete both written and practical assessment tasks.

Must be 16 years of age and possess good language, literacy and numeracy skills.

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Prepare to provide first aid in an ESI environment
• Carry out the provision of first aid in an ESI environment 
• Complete provision of first aid in an ESI environment 

Application

This unit involves the skills and knowledge required to provide first aid in an electricity supply industry (ESI) environment.

It includes the recognition and provision of an initial response where first aid is required and how it applies to ESI workers to meet work health and safety (WHS)/occupational health and safety (OHS), mobility and mutual aid requirements.

No licensing applies to this unit at the time of publication.

Registered Training Organisation (RTO)

Training and assessment delivered on behalf of Allens Training Pty Ltd RTO 90909

The post ESI First Aid appeared first on High Risk Work Solutions.

PUAFER005 Operate as part of an emergency control organisation

Course duration

2-4 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

$200.00 per person in Hobart (GST exempt)

$230.00 per person in Launceston/Devonport (GST exempt)

Please enquire about group booking rates and discounts

Partially funded by Keystone if eligible

Prerequisites

Individuals undertaking this course will need to demonstrate the following to be eligible for entry:

• Capability to complete the practical demonstrations for the course, including:
  • Contribute to facility emergency planning
  • Undertake pre-emergency planning
  • Take on a leadership role/ deputy within the emergency control organisation
  • Wear required emergency control organisation identification
  • Complete facility emergency documentation

Participants will be expected to complete both written and practical assessment tasks.

Must be 16 years of age and possess good language, literacy and numeracy skills

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Undertake pre-emergency planning
• Take appropriate actions in an emergency 
• Assist with post emergency activities

Application

This unit of competency involves the skills and knowledge required to work within the command, control and coordination structure of an Emergency Control Organisation (ECO). An ECO’s priority is the safety of facility occupants and visitors during an emergency which means ECO members are responsible for pre-emergency, emergency and post emergency actions. It includes undertake pre-emergency planning, taking appropriate actions in an emergency and assisting with post emergency activities.

The unit has been developed to cover the facilities as specified in Australian Standard (AS) 3745 and AS4083. For this unit, as covered by AS3745 and/or AS4083, occupants are people attending a facility on a permanent or temporary basis such as an employee, contractor, student or resident, but not a visitor or patient and a facility is a building, structure or workplace that is, or may be, occupied by people (occupants).

All aspects of the unit must be undertaken in accordance with legislative requirements, organisational policies and procedures and accepted safe practices. It applies to members of an ECO who are floor or area wardens and/or wardens or deputy wardens.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Registered Training Organisation (RTO)

Training and assessment delivered on behalf of Allens Training Pty Ltd RTO 90909

The post Fire Warden appeared first on High Risk Work Solutions.

MSMWHS217 Gas Test Atmospheres

Topics include

• WHS Act 2012, Regulations, COP and A/S  
• Risk Assessment, SWMS/JSA’s
• Hierarchy of Control
• Typical gas detectors
• Symptoms of common gases
• Gas generation
• Gas detector challenge/bump testing and calibration
• Prepare for gas test and gas test
• Gas detector maintenance

Duration and Schedule

• Course length: 3-4 Hours (may vary depending on existing experience, competency and class size)
• Class size: Small groups for personalised training

Licencing Requirements in Tasmania

Prerequisites

• 16 years of age or older
• Basic language, literacy and numeracy skills
• Valid Unique Student Identifier (USI) – create or find your USI
• Proof of identity and Tasmanian residential address (e.g. driver’s licence, utility bill, car registration)

Licence Cost

• $150 per person (GST exempt)

Group booking rates and discounts are available – please contact us for pricing. Eligible learners may access partial Keystone funding.

Recognised Qualification & Licensing Pathways

Location and Facilities

• Delivery: Available in Hobart, Launceston and Devonport, or onsite statewide at your workplace.
• Use of High Risk Work Solutions supplied equipment
• All course notes and assessment materials
• Facilities include tea, coffee, biscuits and access to local food outlets.
• Participants are welcome to bring lunch.

PPE required: Safety boots or enclosed shoes, long pants, and a hi‑vis short or long‑sleeve shirt.

Registered Training Organisation (RTO)

High Risk Work Solutions delivers this course as All High Risk Training Pty Ltd trading as All Onsite Training and Assessment RTO 91463, ensuring compliance with the Standards for RTOs. A Statement of Attainment is issued by All High Risk Training Pty Ltd when an individual successfully completes one or more accredited units within this course.

Why Choose High Risk Work Solutions?

• Specialist trainers with real industry experience
• Small class sizes – more practice time on the equipment
• Training available onsite statewide or at our facilities in Hobart, Launceston, or Devonport
• Practical, hands‑on learning

Application

This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries.

It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

The post Gas Test Atmospheres – Tasmania (MSMWHS217) appeared first on High Risk Work Solutions.

MSMPER300 Issue Work Permits

Course duration

4 hours (experience, competency and class size dependent)

Location

Onsite or offsite, statewide

Price

$150.00 per person (GST exempt)

Please enquire about group booking rates and discounts

Partially funded by Keystone if eligible

Prerequisites

A current MSMWHS201 Conduct Hazard Analysis statement of attainment

Must be 16 years of age and possess good language, literacy and numeracy skills

What to bring

USI number (Unique Student Identifier)

If you do not know it, search or create here

Photo ID must be provided on the first day of training

Biscuits, tea, coffee and drinks are provided. There are many takeaway food options nearby or feel free to bring your own lunch

PPE requirements Safety boots, long pants and Hi Vis short/long sleeve shirt

Course outline

• Identify need for work permit
• Ensure job site is prepared for authorised work
• Raise and issue work permits
• Monitor work for compliance
• Receive end of day report
• Close work permit

Application

This unit of competency covers the skills and knowledge required to issue work permits. It covers an understanding of the permit system and the limitations of each permit, and making decisions regarding the need for and correct use of each permit. This unit includes the issue of any and all permits. Permits are called ‘clearances’ by some organisations.

This unit of competency applies to personnel who are required to issue appropriate permits to work to persons conducting a variety of activities in workplace environments in which hazards exist or specific procedures need to be followed and monitored to protect the safety of personnel and the integrity of plant or process.

This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate.

• hot work
• storage tanks, silos, pits, pipes, shafts, ducts, transport vehicles and ships
• testing as part of issuing a work permit
• monitoring as part of working under a work permit
• open areas
• holding the gas tester by hand
• lowering the gas tester into a space, e.g. on a line.

This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Registered Training Organisation (RTO)

The Statement of Attainment is issued by Talented Training RTO #45144.

The post Issue Work Permits appeared first on High Risk Work Solutions.